Image

CSSD PRODUCTS (AUTOCLAVE/STERILIZER)

DM Plant

The Labco DM Plant is a compact, fully automatic water softener. Softeners are used to treat water when the hardness is so high that there might be a risk for lime deposits in pipes and machinery. When hard water passes through the resin bed of the filter tank, the calcium salts that cause hardness are exchanged with the easily soluble salts in the resin bed and the water is softened.
When, after some time, the resin becomes saturated with the calcium salts, they are automatically removed by regeneration.
This regeneration can be programmed to take place 1-7 times a week, depending on water hardness and water consumption. Regeneration usually takes place at night. During regeneration, a brine solution passes through the resin bed. This brine solution is produced in the salt container, the space between the filter holder and the outer cover of the softener. The limestone deposits loosen and are flushed and drained while the "soft" salts reactivate the resin.

Model DM-1000 DM-2000 DM-3000
Flow Rate Lts/Hr. Max 1000 2000 3000
Min 100 200 300
Quantity of Resins in Lts. Cation 50 100 140
Anion 60 110 160
Working Pressure Kg./Cm2 Max 3.5 3.5 3.5
Min 1.5 1.5 1.5
Chemical Required / Regeneration HCL (30% Commercial Lts.) 15 30 42
NaOH (98%) Commercial kgs 4.2 7.7 11.2
Quality of treated water Electrical conductivity micromoh/cm 10 10 10
Total Dissolved solids in PPMC 5 5 5
pH 7.5-8.5 7.5-8.5 7.5-8.5
Output/Regeneration in Lts.
(Based on Iomic Load of 200 PPM)
4800 8800 12800

Featured Items